I've added bounce server and attatched it to the proper delivery server but I keep seeing 0 bounces

eritest

eritest

New Member
I have finished bounce back to the server settings
mhh8vm


The Bounce server choose status can be sent successfully, but once the Bounce server is enabled, it will fail to send. Please see the screenshot:
mhhd5t
http://prntscr.com/mhhd5t


Bounce server choose status can be sent successfully
Please see the screenshot:
mhhebp
http://prntscr.com/mhhebp

Campaigns Delivered is ok。
http://prntscr.com/mhhkap
http://prntscr.com/mhhlyq


How can I set up the bounce server to work properly?
thank you very much！
 
Last edited:
@eritest - Set Force FROM to Always.
 

Attachments

  • Screen Shot 2019-02-13 at 6.26.05 PM.png
    Screen Shot 2019-02-13 at 6.26.05 PM.png
    28.7 KB · Views: 5
eritest said:
[QUOTE =“laurentiu，post：38022，member：2960”] [USER = 3366] @eritest [/ USER] - 将Force FROM设置为Always。[/ QUOTE]

It still seems that I can't send it normally.
http://prntscr.com/mknpty
Click to expand...
...try with (as widely posted on the forum) FROM = ReplyTo = ReturnPath = bounce, this way, receiving servers, which nowadays reply to any email address they can find in the header, will have no choice but to use the one you determined ;)
(oh, and don't rely on SwiftMailer, it is not as 'compliant' as it pretends to be, and 2.6x slower than PhpMailer (which actually is RFC compliant))
 
[QUOTE =“frm.mwz，帖子：38237，成员：1105”] ...尝试（在论坛上广泛发布）FROM = ReplyTo = ReturnPath = bounce，这样，接收服务器，现在回复任何电子邮件他们可以在标题中找到的地址，别无选择，只能使用您确定的地址 ;）
（哦，并且不依赖于SwiftMailer，它不像它假装的'兼容'，比PhpMailer（实际上符合RFC）慢2.6倍）[/ QUOTE]


Is this the case? I can only be at Reply to email and Bounce server Which one to choose?
 
eritest said:
[QUOTE =“frm.mwz，帖子：38237，成员：1105”] ...尝试（在论坛上广泛发布）FROM = ReplyTo = ReturnPath = bounce，这样，接收服务器，现在回复任何电子邮件他们可以在标题中找到的地址，别无选择，只能使用您确定的地址 ;）
（哦，并且不依赖于SwiftMailer，它不像它假装的'兼容'，比PhpMailer（实际上符合RFC）慢2.6倍）[/ QUOTE]


Is this the case? I can only be at Reply to email and Bounce server Which one to choose?
Click to expand...
Please quote in English and ask a clear question.
However, what is in this post
https://forum.mailwizz.com/posts/38237
is currently correct.
 
frm.mwz said:
...try with (as widely posted on the forum) FROM = ReplyTo = ReturnPath = bounce, this way, receiving servers, which nowadays reply to any email address they can find in the header, will have no choice but to use the one you determined ;)
(oh, and don't rely on SwiftMailer, it is not as 'compliant' as it pretends to be, and 2.6x slower than PhpMailer (which actually is RFC compliant))
Click to expand...


Is this the case? I can only be at Reply to email and Bounce server Which one to choose?
 
You must log in or register to reply here.
Back
Top